| |
|
|
| |
 |
|
|
|
|
|
|
|
|
|
Motorcycle cable parts come in various shapes and sizes conceivable these days. The vast array of motorcycle cable parts would be enough to serve as a reference for writing a book pertaining on the subject of motorcycle cable parts.
Motorcycle cables parts
Motorcycle air filter parts
Petrol tank motorcycle parts
Motorcycle fork parts
Motorcycle fork springs parts
Motorcycle front fork parts
Motorcycle fork brace parts
Motorcycle fork tube parts
Motorcycle horn parts
There are actually wide arrays of motorcycle cable parts but not all of these are commonly used. However, there are motorcycle cable parts that are frequently bought and used by motorcycle riders and these are the following: the first one is the air rider patch cable that allows the connection of a standard 5 pin Din Dynamic headset like the Air Rider HC-4 directly to be connected to a handheld CB. It is of great importance to remember that not all CB's are the same thus the CB to be use must accept the standard duplex connector on the patch cable.
Another commonly used motorcycle cable parts are the HC4/HC3 Dynamic 6pin curly cords, which are known to work best with the Air Rider headset sold mostly by online motorcycle cable parts dealers. However, the needed push-to talk button needs to be purchased separately. The next most preferred motorcycle cable parts are the direct two handlebar mount CB patch cables. These cables are use for the lower cord replacement for the HC-4 that has a standard 5pin Din connector on one end and a 6pin mini Din connector on the other end. These cables are also used as patch cables for Midland75-820 & 75-785, and for the Maxon HCB-10C. It also fits the Cobra 38WXST. These kinds of motorcycle cable parts require the need to select a push-to-talk button.
The next motorcycle cable parts are the passenger volume controls. These Air Rider volume controls needs only to be simply plugs in line with the standard 5pin Din headset. The use of a strong nylon and Velcro straps makes it easy to attach to motorcycles. However, such volume controls will only decrease the volume set at the master control such as the radio and should never be mistaken for an amplifier.
The next in the list of commonly used motorcycle cable parts are the passenger Velcro straps PTT 6'. The passenger Velcro strap PTT 6' is commonly used in conjunction with the CB patch cable. The nylon and Velcro straps are used to tightly attach the PTT to the handlebar grip or to any place or location in the motorcycle. The button is 100% waterproof. This PTT can be bought together with either a 12"" or a 6' cable depending on the needs of the customer. Also at the end of the cable is a standard 2.5 mono audio plug.
There are still more kinds of motorcycle cable parts to choose from, there the regular braided cables that are usually without the steel shell protection and are considered weaker than armored cables. Motorcycle cables that are flexible are easier to work with. The use also of non-armored cable locks offers a higher resistance to various cutting techniques as opposed to steel braided cables.
|
Best Motorcycle Parts
|
Motorcycle parts and accessory |
Motorcycle spare parts |
Motorcycle cables parts
|
|
|
|
|
|
